Add some style to your new C8 Corvette with our interior Carbon Fiber Transmission Control Trim Cover Kit for any model 2020+ Corvette C8 to cover up the silver/chrome around the buttons for a nice clean Carbon Fiber look
- 1 Piece Kit – Buttons available here
- 100% Real Carbon Fiber Twill 3k Plain
- Black Carbon Fiber
- High Gloss / UV Protection
- Easy Installation – Adhesive Backing Preinstalled *HIGH QUALITY WHITE TAPE*
- Non-Bulky OEM style
- This also acts as a protective cover
- Processing: 1 day
- Fits 2020+ C8 Stingray / Z06
 |
Please allow up to 2-3 days for your order to arrive if “In Stock” | 3-6 Weeks if on “Back-Order” as this is a current new release and is currently available as a “Pre-Order”. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it’s always worth it! |
|
 |
Returns are easy, simply contact us for a returns number and send your item to our returns center for fast processing. We’ll get you a replacement or refund in a snap! |
| Weight | .3 lbs |
|---|---|
| Dimensions | 2 × 3 × .5 in |
| Style | Carbon Fiber, Red Carbon Fiber, Blue Carbon Fiber, Stealth (Painted Black) |
5 reviews for 2020 – 24 C8 Corvette Carbon Fiber Transmission Control Outer Trim Cover | Black/Red/Blue Carbon
Add a review
You must be logged in to post a review.
Related products
Carbon Fiber Interior Parts
-
Carbon Fiber Interior Parts
2020-24 C8 Corvette Carbon Fiber Window Switch Panels (Coupe/Convertible) | Next-Gen Carbon
-
Carbon Fiber Parts
2020-24 C8 Corvette Carbon Fiber Rear Diffuser Fins | Anderson Composites
-
Carbon Fiber Interior Parts
2020-2024 C8 Corvette Carbon Fiber Push to Start Button Cover | Next-Gen Carbon
-
Carbon Fiber Interior Parts
-
-
-
tomadda@hotmail.com (verified owner) –
Having the stealth interior option, the bright silver trim cover around the gear selector really stuck out…This CF cover really completed the look!
Make sure surface is clean and dry fit first…Also inspect all the CF edges, particularly around the bottom of the reverse pull switch section for smoothness…I had to slightly trim some clearcoat bulges for the edges in this area…
Once installed all the gear switches and buttons worked great with no obstructions…I then used a heat gun afterwards to activate the adhesive…Press well during cooling and the piece should be secured well…
David Wynn (verified owner) –
It needed more adhesive!
njimoon@bellsouth.net (verified owner) –
Fit perfect took five minutes to install. It’s a little delicate so you just have to take your time putting it in match is perfect to the other carbon, fiber trim I have I would recommend this.
Jeff Skinner (verified owner) –
mine fit perfectly. still no issues after a couple months of installation. was backordered, but once item in stock, i had it within a few days. any questions i had on this item or any other, they are quick to respond. great service and product
Dale Cillian (verified owner) –
Doesn’t fit properly. Have retaped this part three times. Still pops up and will not stay in place. Buttons catches on carbon fiber.
Next-Gen Speed –
We recommend professional installation as the item needs to be seated properly, for proper installation. If off by just a tad, it will cause obstructions. The item should be stuck on, precisely, without any movement. Adhesive promoter helps with this too
We show this in the description and photos, and cannot stress getting this professionally installation to assist.