2016 – 24 6th Gen Camaro SS / ZL1 Lowering Springs (Front Only) Performance Version | BMR Suspension

*Fits all 2016-2018 Camaro SS models (does not include rear springs)
Lowers your Camaro approximately .75” in the front

There is nothing like the aggressive look of a car with the right stance! BMR Suspension believes the right springs go beyond looks—your 2016-newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.

Blending aesthetics and performance, BMR has designed the SP042 for the street performance crowd who want to use their cars in a variety of application. These springs will lower the front of your Sixth Gen Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear working spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension!

BMR Suspension’s SP042 lowering springs are available in red powder coat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.

***NOTE: This product was not engineered for a V-6 or 4-Cylinder Camaros, nor has it been tested on them.***

Features:

– Designed to fit 2016-Newer V8 Chevrolet Camaro
– Drops your Camaro ¾” in the front
– Improves handling and ride quality
– Manufactured from chrome silicon high-tensile spring wire
– Cold wound on a CNC Coiling Machine to exact specifications
– Lifetime warranty against spring sag
– Stress-relieved at 750 degrees F
– Shot-peened
– Computer tested for accurate height and spring rate
– Designed in the U.S.A.
– Made in the U.S.A.

Shipping

		Please allow up to 2-3 days for your order to arrive OR if on “Back-Order” contact us for current ETA.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it’s always worth it!
		Returns are easy, simply contact us for a returns number and send your item to our returns center for fast processing. We’ll get you a replacement or refund in a snap!